Усилвател Match UP 10DSP
1499 лв.с ДДС
Съгласен съм с общите условия на сайта
Съгласен съм да ми бъдат обработени личните данни

Усилвател Match UP 10DSP

на 12 вноски по 147.55 лв.
Характеристики

Една от основните идеи при създаването на Match UP 10DSP е сериозен аудио ъпгрейд над фабрични Premium аудио системи като Harman Kardon в BMW и Burmester в Mercedes. Инсталацията на Match UP 10DSP в тези автомобили се осъщестява чрез специализирани Plug&Play кабели без да се нарушава и кабел от инсталацията на автомобила.
Plug&Play кабел за BMW с Harman Kardon и RAM модул след 2019г
Plug&Play кабел за Mercedes с Burmester

Характеристики: Match UP 10DSP

  • Ultra efficient 10-channel amplifier with 1-channel line output and 11-channel DSP

  • Perfect for upgrading multi-channel factory sound systems

  • Optional cable harnesses for easy integration into existing multi-channel factory sound systems

  • Extremely powerful 64 Bit “fixed point” Audio DSP

  • ACO – Advanced 32 Bit CoProcessor platform for system and DSP features like:

    • ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals

    • SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.

  • High power 8-channel highlevel input with ADEP.3 circuit – two channels with up to 32 V RMS input sensitivity

  • 1 to 1 Input / Output Routing (IOR) in combination with the optional MEC ANA-LOG IN module – same number of highlevel inputs and amplifier outputs

  • Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems

  • MATCH Extension Card slot (MEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.

  • Optical input in SPDIF format with sampling rate between 12 and 96 kHz

  • Mono RCA output for the connection of an external amplifier e.g. subwoofer amplifier

  • SCP (Smart Control Port) for optional accessory like WIFI CONTROL, DIRECTOR, CONDUCTOR & Co.

  • Auto Remote switch

  • Start-Stop capability down to 6 Volts supply voltage

  • Compact design with low heat dissipation thanks to extraordinary efficiency

10-канални
С вграден DSP

Scope of delivery

1 x MATCH UPGRADE amplifier UP 10DSP
2 x Connection cable
1 x Control Input-to-SCP adaptor
1 x Mounting plates & material
1 x USB cable
1 x Instruction manual

Output power RMS

 

- @ 4 Ohms

Channels A - H: 8 x 65 Watts

- @ 2 Ohms

- @ 1 Ohm

- bridged @ 4 Ohms

- bridged @ 2 Ohms

- Subwoofer output @ 4 Ohms

Channels I - J: 2 x 90 Watts

- Subwoofer output @ 2 Ohms

Channels I - J: 2 x 160 Watts

Amplifier technology

Class GD

Inputs

8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In

Input sensitivity

Channels A - F: 4 - 16 Volts
Channels G - H: 4 - 16 or 8 - 32 Volts

Input impedance RCA / Cinch

Input impedance highlevel

9 - 33 Ohms with ADEP.3

Outputs

10 x Speaker output
1 x RCA / Cinch
1 x Remote Out

Output voltage RCA / Cinch

3 Volts

Frequency response

20 Hz - 22,000 Hz

DSP resolution

64 Bit

DSP power

295 MHz (1.2 billion MAC operations/second)

Sampling rate

48 kHz

DSP type

Audio signal processor

Signal converters

A/D: BurrBrown
D/A: BurrBrown

Signal-to-noise ratio digital input

105 dB (A-weighted)

Signal-to-noise ratio analog input

103 dB (A-weighted)

Distortion (THD)

< 0.03 %

Damping factor

> 100

Operating voltage

10.5 - 17 Volts (max. 5 sec. down to 6 Volts)

Power rating

DC 12 V ⎓ 60 A max.

Idle current

500 mA

Max. remote output current

500 mA

Fuse

2 x 25 A LP-Mini-fuse (APS)

Additional features

Class GD technology with dynamically controlled
power supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB, MEC slot, Auto Remote switch, galvanically isolated Line Out

Dimensions (H x W x D)

46 x 145 x 163 mm /
1.81 x 5.71 x 6.42"

1499 лв
Количество    
Аval-bg.com ® Всички права запазени