Усилвател Match UP 7DSP
999 лв.с ДДС
Съгласен съм с общите условия на сайта
Съгласен съм да ми бъдат обработени личните данни

Усилвател Match UP 7DSP

на 12 вноски по 98.33 лв.
Характеристики

UP 7DSP е най-мощният усилвател MATCH DSP и включва нашата нова схема ADEP.3. Той предлага общо седем усилвателни канала, както и допълнителен изход за предусилвател, което позволява - в комбинация с интегрирания 8-канален DSP - перфектно да управлява индивидуални и сложни конфигурации на високоговорителите. Два от изходните канали доставят 160 вата RMS в 2 ома - достатъчно достатъчно за захранване дори на големи субуфери.

Но грубата сила е нищо без „интелигентно управление“ - затова UP 7DSP включва зашеметяващ мощен 64-битов DSP от последно поколение, който дава възможност да се реализират изцяло нови революционни и собствени звукови функции като „Augmented Bass Processing“, „StageXpander“ или функцията „RealCenter“. Повярвайте ни - ще изпитате наистина спиращо дъха звуково изпълнение.

Но това не е достатъчно - просто се наслаждавайте на музика от вашия смартфон в безпрецедентно качество. UP 7DSP предлага слот за MATCH разширена карта (MEC) за допълнителни интерфейси за вход и изход, като напр. нашия Bluetooth аудио стрийминг модул или звукова карта с висока разделителна способност.

Благодарение на нашия професионален и лесен за използване софтуер DSP PC-Tool V4, конфигурацията и настройката на UP 7DSP е доста проста и интуитивна.     
 

 

Характеристики:
 - 7-канален усилвател за надграждане от клас HD с интегриран 8-канален 64-битов DSP за универсални приложения
 - Слот за MATCH разширена карта (MEC) за допълнителни модули за вход / изход като Bluetooth® аудио стрийминг, High Resolution аудио стрийминг чрез USB и т.н.
- Интелигентен вход на високо ниво с ADEP.3 схема (Advanced Diagnostics Error Protection) и функция за автоматично включване
- Уникални DSP функции като „Augmented Bass Processing“, която динамично оптимизира басовата характеристика на субуфера, „StageXpander“, която значително разширява стерео перспективата, функцията „RealCenter“, която позволява перфектно фокусиран звук както за шофьора, така и за пасажера и много други
- Лесна конфигурация чрез интуитивния софтуер за DSP PC-Tool
- Възможност за старт-стоп до 6V захранващо напрежение
- Оптичен вход във формат SPDIF с честота на дискретизация между 12 и 96 kHz
- Моно RCA изход за свързване на външен усилвател, напр. усилвател на субуфер
- Компактни размери и ниско разсейване на топлината благодарение на максималната ефективност

Special features:

Class HD technology
The UP 7DSP combines the advantages of a Class H technology with the principle of a class D amplifier. The result is an unsurpassed efficiency which easily outperforms any conventional Class D amplifier. By varying the internal supply voltage depending on the amplifier’s amplitude of the input signals, idle losses are significantly reduced and overall efficiency is close to maximum at any time.

Smart highlevel input ADEP.3
Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if an amplifier will be hooked up - but not with the UP 7DSP.
The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Start-Stop capability
The switched power supply of the MATCH UP 7DSP assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank. If the supply voltage drops below 10.5 Volts for more than five seconds the amplifier goes to “Protect mode” (Status LED lights up red) in order to avoid any further discharge of the car’s battery.

Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.

Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the UP 7DSP and potentially connected amplifiers once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The MATCH UP 7DSP will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.

7-канални
С вграден DSP

DSP Features:

RealCenter
The “RealCenter” feature is an algorithm, developed by Audiotec Fischer, that emphasizes the music information which is present in both the left and right front channel to create an unique center signal. In contrast to common procedures in which only the channels are summed up, the intensity of the center signal is also dynamically controlled by the stereophonic informational content of the left and right channel. Sounds complicated but this effect is astonishing: That means if solely the left or right channel delivers an audio signal, the center channel will not reproduce a signal. In the case of common algorithms, the volume level of the center channel is only reduced by 6 dB (= half volume level).
Audiotec Fischer’s “RealCenter” allows a unique, broadened sound staging for both driver and co-driver at the same time! Therefore, the disadvantages of a conventional center channel such as an intrusive, small sound stage are things of the past.

Augmented Bass Processing
Audiotec Fischer’s proprietary “Augmented Bass Processing”, consisting of the two revolutionary sound features “Dynamic Bass Enhancement” and “SubXpander”, has been especially developed to dramatically improve the bass reproduction of subwoofers.
The “Dynamic Bass Enhancement” ingeniously combines maximum deep bass and highest sound pressure – regardless of the music style or the tone controls in the head unit. Depending on the input signal, the “Dynamic Bass Enhancement” gains the lower frequency range and varies the cut-off frequency of the subsonic filter. The result is a significantly more powerful and deeper bass response at low and medium volume levels without the risk of overloading the subwoofer, neither mechanically nor electrically at high volume levels. It is simply fascinating which bass performance is suddenly possible.
If you want an even lower and “darker” bass reproduction, the “SubXpander” can be additionally activated. Therefore, subharmonic tones are added to the fundamental tones in the frequency range between 50 and 100 Hz.

StageXpander
Depending on the speaker arrangement in the vehicle, a more or less wide stereo sound stage can be created at the front seats. A center speaker may limit the spatial reproduction of the music additionally. This is where Audiotec Fischer’s new “StageXpander” comes into play – a sound feature which seems to break the acoustic limitations and thus allows to create a way broader stereo base without negatively affecting the precision of the localization of voices or instruments!
The effect can be adjusted according to your personal preferences in four steps.

ClarityXpander
You are looking for more transparency and substance in the treble reproduction? With the “ClarityXpander” Audiotec Fischer is now offering the right tool.
Properly adjusted (and therefore selectable in three steps) the feature adds additional harmonics in the upper frequency range – this is especially useful if the original speakers lack some brilliance in the treble response. The extra treble-kick is not only available for the two front channels but also separately adjustable for the center channel.
Even better – the center channel allows to activate an automatic and dynamic control so that music with “loads” of treble doesn’t fatigue your hearing.

 

Output power RMS / max.

 

- @ 4 Ohms

5 x 65 / 130 Watts (Front / Rear / Center channels)

- @ 2 Ohms

- @ 1 Ohm

- bridged @ 4 Ohms

- bridged @ 2 Ohms

- Subwoofer output @ 4 Ohms

- Subwoofer output @ 2 Ohms

2 x 160 / 320 Watts

Amplifier technology

Class HD

Inputs

4 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x MEC
1 x Remote In

Input sensitivity

Highlevel 5 - 11 Volts

Input impedance RCA / Cinch

Input impedance highlevel

13 Ohms

Outputs

7 x Speaker output
1 x RCA / Cinch
2 x Remote Out

Output voltage RCA / Cinch

3 Volts RMS

Frequency response

20 Hz - 22,000 Hz

DSP resolution

64 Bit

DSP power

295 MHz (1.2 billion MAC operations/second)

Sampling rate

48 kHz

DSP type

Audio signal processor

Signal converters

A/D: BurrBrown
D/A: BurrBrown

Signal-to-noise ratio digital input

105 dB (A-weighted)

Signal-to-noise ratio analog input

103 dB (A-weighted)

Distortion (THD)

< 0.03 %

Damping factor

> 100

Operating voltage

10.5 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current

450 mA

Max. remote output current

500 mA

Fuse

2 x 25 A LP-Mini-fuse (APS)

Additional features

Class HD technology with dynamically controlled
power supply, ADEP.3 circuit, Start-Stop capability, Control Input, USB, MEC slot, Auto Remote switch, galvanically isolated Line Out

Dimensions (H x W x D)

46 x 130 x 153 mm /
1.81 x 5.12 x 6.02"

 

Какво им в кутията:

1 x MATCH UPGRADE amplifier UP 7DSP
2 x Connection cable
1 x Mounting plates & material
1 x USB cable
1 x Instruction manual 

BA_UP-7DSP
 
999 лв
Количество    
Аval-bg.com ® Всички права запазени