Субуфер Brax Matrix ML10

Субуфер Brax Matrix ML10

на 12 вноски по 122.94 лв.
Характеристики

For years, our BRAX subwoofer have set the benchmark for precise and controlled bass response.

When you have already built the perfect speaker, building the next perfect speaker is an ambitious project, but not for BRAX. BRAX would not be BRAX if we were not able to identify every single detail that improves the sound quality through the use of ever advancing technologies. Perfection is subject to refinement and the human ability to learn.

In the case of the ML10, the secret lies in the unique cone or - to be more precise - in its entirely new "MicroSphere" coating. This patented technology embeds ceramic hollow spheres with a diameter of solely 75 µm in a polyamide layer that is applied to the cone. That special coating not only improves the stiffness of the hand-scooped cone, but its inner damping as well. These stabilizing measures do not necessarily have to result in an increased moving mass. In actuality, we have achieved the contrary to this – in comparison with its predecessor the cone mass has been reduced, which results in a lower total Q factor and therefore, even better impulse response.

The pure design and numerous technical features of this exceptional subwoofer are the things that make a legend. The perfectly linear magnet structure for lowest possible distortion, large and multiple ventilated voice-coil for outstanding electrical power handling as well as the rigid and aerodynamically efficient diecast basket add up to an unprecedented overall concept for the most accurate and uncompromising bass response.

Therefore, the new BRAX MATRIX ML10 is now more than ever, a must-have for every sound enthusiast who only settles for the best.


Features 

    Remarkable stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
    Special shaped rubber surround for long linear cone excursion
    Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
    Driver parameters optimized for perfect impulse response in compact, sealed enclosures
    65 mm voice coil with exceptional winding height for high linear excursion and lowest possible distortion
    Solid, unique diecast basket
    Massive push-terminals for large wire gauge
    Ultra-precise machined magnet system for highest magnetic flux linearity


Delivery contents
1 x High-End Subwoofer BRAX MATRIX ML10
1 x Certificate
1 x Data sheet

Power RMS / max.

 P

600 / 1200 Watts

Impedance 

Z

4 Ω

DC resistance 

Re

3.4 Ω

Resonance frequency 

Fs

35 Hz

Mechanical Q factor 

Qms

8.10

Electrical Q factor 

Qes

0.49

Total Q factor

Qts

0.46

Compliance

Cms

241 µm/N

Equivalent air volume

Vas

40 L

Force factor 

B*I

11.60 Tm

Efficiency 1 W / 1 m

SPL

87 dB

Cone area 

Sd

346 cm²

Moving mass 

Mms

89 g

Cone material

 

Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer

Mechanical resistance 

Rms

2.37 kg/s

Voice coil diameter

ø

65 mm / 2.6"

Voice coil winding height

 

33 mm / 1.3"

Max. linear excursion 

Xmax

+/- 12.5 mm

Outer diameter

ø

275 mm / 10.8"

Installation diameter

ø

235 mm / 9.3"

Installation depth

 

114 mm / 4.5"

   

Recommended enclosure volumes  

Sealed box  

Net volume

 

28 L

Lower limiting frequency (-3dB)

 

45 Hz

   

Vented box  

Net volume

 

Port diameter

ø

Port area

 

Port length

 

Port tuning frequency

Fb

Lower limiting frequency (-3dB)

 

 

 

 

DB_BRAX_MATRIX_ML10
 
0 лв
Количество    
Аval-bg.com ® Всички права запазени