Субуфер Brax MATRIX ML8 SUB
1149 лв.с ДДС
Съгласен съм с общите условия на сайта
Съгласен съм да ми бъдат обработени личните данни

Субуфер Brax MATRIX ML8 SUB

на 12 вноски по 113.10 лв.
Характеристики

The legendary BRAX MATRIX loudspeaker series – since many years the synonym for state-of-the-art sound quality – is now expanded with the ML8 SUB. Just as uncompromisingly developed and manufactured as all BRAX loudspeakers, it pursues the goal of acoustic perfection.

Инсталация на Brax ML8 Sub в Nissan GTR

Precision in perfection! 
For years, our BRAX subwoofer has been the benchmark for precision and unconditionally controlled bass reproduction. It was even more demanding to create a BRAX subwoofer that uncompromisingly reproduces deep bass even in smallest possible enclosures. Each component of this exceptional driver is not only made for dynamics and perfect tonality, but is also designed to convert even huge loads of amplifier power into sound pressure without compression.

MicroSphere  a material for two opposing requirements
The demand for maximum cone stiffness in combination with highest innner damping seems like the attempt to square the circle – actually the unique "MicroSphere" coating, where ceramic micro-hollow spheres with a diameter of only 75 microns are embedded in a polymer layer and applied to the diaphragm makes the impossible possible. It warrants for maximum acoustic precision and unrivaled sound quality. 

Timeless elegance
The clear, reduced design language is the distinguishing feature of every BRAX product  the ML8 SUB follows this philosophy unconditionally. The combination of the finest materials is underlined once more by the optionally available MR8 stainless steel ring, which can be used as a mounting ring or to fix the grille, depending on the installation position. Of course, the ML8 SUB comes in a noble wooden box with its own serial number, which is recorded in a service database.

Features:

    Exceptional stiff hand-scooped paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer offers best possible impulse response
    Specially shaped rubber surround for long linear cone excursion
    2 x 2 Ohms dual voice coil with exceptional winding height for high linear excursion and lowest possible distortion
    Optimized voice coil ventilation through large, mesh-protected holes in T-yoke and basket for almost zero compression effects and maximum heat dissipation
    Specially developed, aerodynamically optimized and extremely solid aluminum diecast basket
    Extremely powerful and precisely machined magnet system for highest magnetic flux linearity
    Massive push-terminals for large wire gauge

Delivery contents:

1 x High-End Subwoofer BRAX MATRIX ML8 SUB
1 x Certificate
1 x Data sheet

Power RMS / max.

 

400 / 800 Watt

Impedance 

Z

2 x 2 Ω

DC resistance 

Re

2 x 1.9 Ω

Resonance frequency 

Fs

32 Hz

Mechanical Q factor 

Qms

9.63

Electrical Q factor 

Qes

0.60

Total Q factor

Qts

0.56

Compliance

Cms

323 µm/N

Equivalent air volume

Vas

22 L

Force factor 

B*I

10.3 Tm

Efficiency 1 W / 1 m

SPL

85 dB

Cone area 

Sd

219 cm²

Moving mass 

Mms

83 g

Cone material

 

Paper cone with “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer

Mechanical resistance 

Rms

1.67 kg/s

Voice coil diameter

ø

50 mm / 2.0"

Voice coil winding height

 

26.4 mm / 1.0"

Max. linear excursion 

Xmax

+/- 9,2 mm

Outer diameter

ø

222 mm / 8.7"

Installation diameter

ø

191 mm / 7.5"

Installation depth

 

95.6 mm / 3.8"

 

 

 

 

Recommended enclosure volumes

 

 

 

Sealed box

 

Optimal enclosure size

Minimal enclosure size

Net volume

 

17 L

10 L

Lower limiting frequency (-3dB)

 

43 Hz

48 Hz

DSP setting highpass filter

 

Frequency: 32 Hz
Characteristic: “Self-define”
Q-Factor: 1.0

Frequenz: 35 Hz
Charakteristik: “Self-define”
Q-Faktor: 1,0

 

 

 

 

Vented box

 

 

 

Net volume

 

Port diameter

ø

Port area

 

Port length

 

Port tuning frequency

Fb

Lower limiting frequency (-3dB)

 

-

 

Our specifications for the net volume of sealed enclosures always refer to unfilled cabinets without any damping material inside. The net volumes can be reduced if the cabinet will be filled completely (not stuffed) with suitable materials. The following materials can be used for this purpose:

 -polyester wadding achieves a volume reduction of up to 5%
 -mineral wool or rock wool achieves a volume reduction of up to 10%
 -sheep wool achieves a volume reduction of up to 20% come

Note:
Damping of vented enclosure (as long as they are solely used in the frequency range up to 150 Hz) is counterproductive because the damping material generally reduces the effectiveness of the bassreflex port.

DB_BRAX_MATRIX_ML8-SUB
 
1149 лв
Количество    
Аval-bg.com ® Всички права запазени